
Base Cabinet Construction
- I-beam construction.
- 1/2” plywood cabinet backs are dadoed to receive I-beams and bottoms. 1/2” plywood hanging rail.
- 1/2” plywood cabinet sides are dadoed to receive 1/2” bottoms, I-beams, and cabinet back.
- Undermount glides standard. Soft close available as an upgrade option.
- 3/4” natural wood veneer finished engineered wood shelves, edgebanded on visible edge. All shelves are adjustable.
- Natural finished wood interiors, not paper or plastic.
- Full overlay doors and drawers are standard.
- 5/8” solid hardwood dovetailed drawer box with all sides dadoed to receive 1/4” plywood bottom. 1/4” plywood bottom captured four sides.
- 1 1/2” solid hardwood face frames, dadoed to receive 1/2” plywood case sides, I-beams, and bottoms. Cabinets over 36” wide will have center mullion.
- High-strength shelf clips. Sides pre-bored for shelf adjustment.
- Self-closing, 6-way adjustable overlay concealed 1 1/4” hinge, open 110 degrees.
- 1/2” plywood toekick board installed between cabinet end panels. Does not project beyond outside face of end panel. 1/4” matching plywood toe kick cover applied after installation.
Wall Cabinet Construction
- 1/2” plywood construction.
- Hanging rail along top and bottom of cabinet behind back. Installation screws may be placed inside cabinet or above top & below bottom from outside of cabinet.
- 1/2” plywood cabinet sides are dadoed to receive 1/2” tops, bottoms, and backs.
- 3/4” natural wood veneer finished engineered wood shelves, edgebanded on visible edge. All shelves are adjustable.
- Natural finished wood interiors, not paper or plastic.
- Full overlay doors.
- 1/2” plywood cabinet backs are dadoed to receive tops and bottoms. 1/2” plywood hanging rail.
- 1 1/2” solid hardwood face frames, dadoed to receive 1/2” plywood case sides, tops, and bot- toms. Cabinets over 36” wide will have center mullion.
- High-strength shelf clips. Sides pre-bored for shelf adjustment.
- Self-closing, 6-way adjustable overlay concealed 1 1/4” hinge, open 110 degrees.
- 1/2” plywood bottoms same as tops.
